OSISCO.com***-------------------CUSTOMERS

Some Major Clients in North America

Goodyear USA
Goodyear Canada
General Motors
Shell
Rubbermaid
Dow Chemical
Petro Canada
Abitibi Consolidated Sales Corp.
Dayton Tire & Rubber Company

U. S. Army
Nor Baker
Atlas Copco
Ingersoll Rand
Compair
Coco-Cola
3M
Nash Engineering Company
Bombardier

Ford Motor Company - They have recently issued an international TOX Number 163908, for approved usage of Dynamic Descaler (Bio D'Scale) in all Ford plants worldwide.

Download US Navy Test

Welding Guns and hoses checked by Ford Personnel after cleaning - now operating without heating. Scheduled to clean all their guns every 4 to 6 months to maintain problem free production.

Also, specialized hoses costs them approximately $215.00 US for 6 feet. Due to regular cleaning they do not have to be changed as often due to clogging! They have 700 hundred of those hoses!

Some Major Clients in Malaysia
(Dynamic Descaler is known as Bio D'Scale in Southeast Asia.)

Shell Refinery, Port Dickson
Matsushita Air Conditioning Corp. SDN. BHD.
Chemi-Con Malaysia
Lafarge Cement
Matsushita Compressor and Motor SDN. BHD.
Shangri La Hotel, Kuala Lampur
Perusahaan Otomobil Nasional BHD.
Kings Creameries SDN. BHD.
Mah Sing Plastics Industries SDN. BHD.
Furukawa Cables

Toyodempa, Melaka
Goodyear Tires, Shah Alam
Toyota Motors, Shah Alam
Ford Motors, Shah alam
Tasek Cement, Perak
Perak Hanjoong Cement, Perak
Swiss Garden Resort, Lumut
Toyo Plastics, Ipoh
Popular Rubber, Ipoh
Southern Steel, Prai
Watta Batteries, Kuala Lampur

Before

After

Shangri La Hotel - Complete Water Side Cleaning of High Pressure Steam Washer Heat Exchanger

Unable to remove cover as it was fused to the shell. Just 2 weeks prior to our cleaning one more heat exchanger of the same condition was replaced for approximately $4,500.00 US.

Observations:
The tube side is seen to be coated with a thick layer of rust, scale & mud. This would have tremendously retarded thermal transfer efficiency, causing extremely high operating costs and damage & eventual breakdown of the heat exchanger. Some tubes were partially clogged. Due to the age of the machine and the probable bad condition of the shell cover seals, the shell cover was not opened for a full view of the tube bundle. Because of this even manual cleaning could not be performed.

After 1 1/2 hours of circulation with BIO D'SCALE, it can be clearly seen that the tube bundle has been cleaned to bare metal. All rust, scale and mud has been removed completely, bringing the heat exchanger to optimum operating condition on the waterside.

The Perfect Solution To Your Water Scale Problems!